Industry News

Particle filtration of a hydraulic oil filter system is usually sufficient for controlling the level of oil contaminants. However, sometimes "cutting corners" occurs during the system's engineering process, which can lead to inefficient filtration.

Instruction

1. Cleansing the oil of contaminants is generally considered to be secondary to the primary functions of the hydraulic oil filter system and thus is often neglected and underemphasized as a vital part of the design. 

2. This can result in filters performing poorly due to lacking structural integrity, dirt-holding capacity or particle-capture efficiency. There are many hydraulic filters in WUZHOU KINGDA, if you are inetrested in our products, please feel free to contact us!

3. There are also many ways in which the system could be inadequate for performing filtration, including its flow rate, the presence of vibration or if the overall differential pressure is lost because of the filter's location within the system.

4. If more particles are coming into the system from ingression points like breather points, hatches and seals than being removed, the system will never be clean. Therefore, you must have a balance of contaminant exclusion and contaminant removal methods.

5. While several other technologies are available to enhance the abilities of a typical hydraulic oil filter, the best advice would be to thoroughly evaluate the hydraulic filter system currently installed and then develop a plan of action based on the findings.