Industry News

Metal stacking shelves are versatile pieces of furniture that may be useful in your laundry room, garage or pantry. Putting a metal stacking shelf together is a quick project any homeowner can accomplish. Many of these shelves simply snap together. If your shelf is made of a heavier and sturdier metal, build it in the room in which it will be placed. Lighter shelves can easily be transported from one location to another.

Instructions

1

Hold the metal shelves upright, approximately a shelf-length distance apart. If possible, ask a friend or family member to help you hold one of the sides. Otherwise, lean it against a wall or workbench while you support the other side.

2

Position the bottom shelf between the two posts. Put the shelf's knobs into the posts' bottom keyhole openings. Push the shelf down to snap it into place. Place a level on the shelf. Use a rubber mallet to hit the shelf's high end further down, if necessary.

3

Line up the top shelf's knobs with the keyholes on the posts' top edges. Push the shelf into place, hold a level on it and hit it the higher end with a rubber mallet, if necessary.

4

Install the middle shelves the same way you installed the bottom and top shelf.

5

Lay the provided particle board over each shelf. Push one supplied pin through each of the pre-drilled holes in the particle board. Use a hammer to tap the pins into place so as to hold the particle board to the shelf.

There are so many different types metal shelves in WUZHOU KINGDA for you to choose, welcome consult!