Industry News

Thanks to its stable and fine filtration capability, oil filters often used in to some separation and filtration: Such as oil, gas, liquid filtration, solid material screening and solid liquid and other medium separation. Oil filters also widely used in mining, industry, chemical industry, food, medicine, scientific research, and other industries.

The some guidelines for using oil filters as following;

1. In general, replace full-flow oil filter elements at (or before) the recommended replace interval, extremely when working under dusty conditions.

2. Periodically use oil analysis to monitor diesel soot levels and hydraulic oil contamination levels.

3. Install depth-type filters on all engines and hydraulic systems on a side stream or parallel circuit to control combustion soot, hydraulic system “silt” and water contamination. Make them leave the equipment is very important. Depth-type absorbent filters of the finely wound paper type are particularly effective in removing water.

4. Never use coarse oil filters in an attempt to hold a longer filter life. If contamination levels are up to high and it is necessary to change filters often, obtain and install larger filters of the same quality to increase dirt capacity. The key to keep the oil filters clean.

5. When you using the oil filter, please remember to check the oil filter frequently in order to prevent the it is not work, so you need change the oil filter, and if you want to change them, please feel free to contact WUZHOU KINGDA, we can customize the oil filters as your order.

6. Expect short filter life initially when installing a depth-type filter in a parallel circuit. This is a common but temporary situation because the fine depth filter must first clean up the contamination, which the more coarse full-flow filters cannot remove.